offerads
offerads
Guide to Getting Dental Implants in London
Sep 3rd
Guide to Getting Dental Implants in London
If you are curious about getting dental implants in the London SW7 area, you’ve come to the right place. People with missing and damaged teeth often feel too self-conscious to freely smile and even to speak or appear in public. Additionally, interrupted bite patterns caused by these problems can also negatively effect eating habits, which can cause other problems like improper nutrition. If any of this sounds familiar, you’ll learn all about how dental implants can solve your problems here in this guide. Get familiar with what dental implants are and how and where to get quality dental implants in the London SW7 area.
The first thing you need to know about getting dental implants in London is if they are appropriate for you. Have you lost teeth due to:
â¢Tooth decay
â¢Trauma or an accident
â¢Failed root canals
â¢Birth defects
â¢Gum disease
â¢Poor nutrition and oral care
â¢Excessive wear and tear
If the answer is yes, dental implants may be right for you. Dental implants are artificial tooth replacements that generally serve two purposes. They are either prosthetics used to counter tooth loss, or they are cosmetic. The good news is that today’s dental implants look completely realisticâit is almost impossible to distinguish an implant from a natural tooth. Modern dental implants are made of high-quality titanium and require only a tiny pilot hole in the jaw for secure implantation.
Without a doubt, dental implants are the most durable option for treating missing or damaged teeth. Not only this, but dental implants are a top choice for helping to maintain the structure and integrity of your mouth. Because dental implants are stronger and more durable than dentures and bridges, they are a more comfortable and permanent solution (low maintenance as well). Furthermore, dental implants can also be used in combination with other restorative treatments, giving you a wide array of treatment choices. Although there are many options for the treatment of missing or damaged teeth in London, as you can see, none of them are more effective and functional than dental implants. Â
If you are considering getting dental implants in the London SW7 area, you can relax knowing that implants are one of the most successful dental procedures. Studies have shown a success rate of 95% for lower jaw dental implants and 90% for upper jaw implants (after a 5 year period). Smoking and bone density loss, for example, are common reasons that dental implants fail.
To find a dentist in London that offers dental implants, you will need to do a little research. Even though implants are a common procedure, not all London dentists do them. Kensington Dental offers high quality dental implants. Whether your reasons are cosmetic or medical in nature, we offer many different types of implants and implantation procedures that will meet your needs. Additionally, we are one of the first certified dental practices in the UK to offer the revolutionary new procedure known as the “Six Month Smile.” Learn more about it on our websiteâand get started on building the smile of your dreams today!
Dental Implants London E8 Hackney Call now to book a free Dental Implant consultation. 020 8201 8080 Or use our online contact form. lotusclinic.co.uk
Video Rating: 0 / 5
Integrating Thermography With Your Cmms-eam Systems
Sep 2nd
Integrating Thermography With Your Cmms-eam Systems
Introduction
More and more companies are investing in CMMS systems to organize the complex task of managing capital equipment and facility infrastructure whether it is process or production equipment or building systems like HVAC and computers. CMMS is a great organizational tool but cannot directly monitor equipment conditions. PdM technologies including thermography excel at monitoring equipment condition but do not have the ability to organize overall maintenance operations and have historically been closed proprietary systems. If maintenance practices and investments are to really pay off, the integration of the two tools is necessary. As organizational systems become more computerized, the overall access and quality of data substantially increases. The challenge is how best to create, organize and disseminate the vast amount of data that computerized database systems like CMMS inevitability create. In addition, inevitably the added workload will be required without additional staff. To achieve this, one must make sure that any data collected is integrated with the original database. In this way, the investment in building asset databases is leveraged across the many interfaces and platforms. Techniques to push out this data and take back updated machinery health data is what this paper will discuss and provide specific examples of doing this in practice.
Disadvantages of Current PdM/CMMS Systems
No common data formats between systems
No way to integrate CMMS asset data into PdM devices
Data transfer is manual and time consuming, limiting the ability to build an integrated program
No ability to “drill down” and extract metrics
Lost opportunity to develop correlations between PdM methodologies
Advantages of Integrated PdM/CMMS Systems
Asset data entered once is leveraged across multiple systems
Common nomenclature delivers consistent results regardless of operator skill and training
Significant efficiencies can be realized and costs and or effectiveness of PdM tools increased
Route-based data collection derived from historical data results in better utilization of manpower resources
Integrating CMMS Data with Your Thermography Program
To begin you need to create a thermography camera system that can operate like a data logger. Common elements in data loggers are: a touch screen, a sophisticated file management system, the ability to handle data formats like XML and an easy way to input and output data. A tablet form-factor makes it practical to use your finger or stylus to execute software features. Many of today’s popular portable vibration data collectors are excellent examples of product designs that are conducive for integration. Similarly, the thermography camera – data logger system is also best designed to be a ruggedized tablet style computer with a thermal camera channel. Some of the most common features of data loggers that make them easily integrated into CMMS systems are:
Rugged small tablet form factor
Touchscreen user interface
Application-specific software functionality
PC-familiar internal file management
Simple-to-execute file exchange between PC and device
Once the portable user interfaces has been established, a desktop software application must be implemented that interface both to the camera and to CMMS databases. A software wizard can be used to map CMMS source data to a thermography asset database. Data must be exported from the CMMS system as a CSV file. The wizard then imports those fields that are desired to be tracked. The wizard must assure that each record of asset data that is exported from the CMMS system maintains sufficient identification to ensure that links between the CMMS source and the thermography program database are maintained. By automating the population of the thermography asset database, the user eliminates the need to enter potentially hundreds if not thousands of records into the thermography program making it more likely the tool will be used effectively. Once the CMMS source data is in the camera it is highly efficient to tag asset information to captured images during the inspection process using intuitive pull temperature rise, incident severity, repair recommendation, a visible control photograph and the asset descriptions are permanently stored in the infrared camera’s thermal image where they can be automatically loaded in pre designed report templates for quick and easy report generation. In addition to simplifying data gathering and automating report generation, the asset lists can be organized into route files. Such a thermography camera can take asset files and organize them into routes that the thermographer can then use to guide them through all the inspection points assigned for the next inspection cycle, an enormous step toward efficiency and savings.
Summary
Field inspection is a data intensive process
Leveraging a source database across all PdM modality is efficient and cost effective
Standardized data ensures consistent results (for example 3 operators might call the same asset three different names)
Data can be organized into routes and operators can be trained to conduct data gathering
Future potential to correlate data across PdM modality to improve route cause analysis of various equipment problems
Software when used as intended can lower program costs significantly and by eliminating manually intensive data entry the prospects of using an integrated data base within a portable PdM instrument like a thermography camera are greatly enhanced.
Please visit us at www.electrophysics.com/abtempcmms
For more comprehensive White Papers visit our online Knowledge Center.
www.electrophysics.com/thermal-imaging
Electrophysics – IR Cameras for Thermography Professionals
373 Route 46, Fairfield, NJ 07004 Phone: 973-882-0211 Fax: 973-882-0997
London and 3D Visualisation – A Fast-Paced Technology in a Fast-Paced City
Sep 1st
London and 3D Visualisation – A Fast-Paced Technology in a Fast-Paced City
The fast-changing field of computer graphics is used by a wide variety of different industries to promote diverse products. Most recently, these have been using the latest developments in the long history of the technology, 3D visualisation. London has plenty of companies specialising in 3D visualisation, whether in particular fields or developing a versatile service with expertise in several different areas. 3D visualisation can be used to showcase images as diverse as an architects’ masterpiece, a smoothie packet, or a BMW. However, architecture work and interior imaging are especially likely to use 3D visualisation, to give a clear picture of a large-scale scene. Working in 3D, images which would usually be flat and dull can jump out at a client’s audience, through a large or small screen.
The science of visualisation, allowing ideas to be conveyed by representative images, is a very old one. It’s typically been achieved through illustration, and gradually innovations have been developed to make the eye understand a reproduced image as well as one in front of it. Since da Vinci, artists have used a variety of techniques â including central perspective, and cartography techniques â in order to produce a realistic image. Nowadays, science is moving much faster to quickly develop computer graphics, in order to produce a virtual reality often more perfect and beautiful than the product as seen through normal regard. Visualisation works through animated images, computer created CGI images, and more recently, 3D effects, which allow a fully rounded image to be seen on a flat screen. The links between these modern computerised techniques and older illustrative innovations has been outlined by Edward Tufte in two critically acclaimed books.
For a long time, computer graphics visualisation was used to study scientific problems, and for educational purposes. It’s been used in all kinds of high-tech environments, and showcased in various conferences and special publications. Now, however, 3D visualisation can be accessed by any client, for websites which look both aesthetically pleasing and professionally cutting-edge. Within the sciences and educational purposes, 3D visualisation has often been used to visualise an abstract concept, but for showcasing products, the idea is to highlight the superior quality of the product itself. Computerised product visualisation has replaced old-fashioned technical drawing. Although 3D CGI can of course be used to generate animations which help to advertise a product, and which do not represent actual products, it is also used to create engaging and dramatic images of new products.
For 3D visualisation, London is a city with a particularly high density of service providers. This is due partly to the high media and digital development within the city, and also because, like 3D visualisation itself, London is involved in a wide variety of industries, and has been the centre for technological developments through the ages.
For 3D visualisation, London is a city full of clients and opportunities, too. Since the days of Christopher Wren or Isambard Kingdom Brunel, architecture has continued to be an active industry in London, meaning that plenty of visualisation services have developed in the capital. The presence of the Royal Institution of British Architects (RIBA) has helped to ensure that London continues to be a buzzing capital for architecture, and so for architecture visualisation. Additionally, the high-flying offices of the Square Mile demand quality visualisation services for their websites. Various other industries, of course, are also based in London, and many are turning to the exciting new technology to promote their work. In addition, and perhaps most importantly London’s long history of involvement with media, running from the famous Fleet Street newspapers, means that it will always be the natural gravitation point for new communication developments.
Some companies outsource their work to other countries (such as China), looking outside the EU to produce product images using 3D visualisation. London-based workers, however, have the advantage of experience within the city’s industries, as well as being on-spot for emergency deadlines and changing demands.
James Marshall, Creative Director, wrote the Article ‘London and 3D Visualisation â A Fast-Paced Technology in a Fast-Paced City’ and recommends you Google ‘Dhub’ for more information on 3D visualisation.
More 3d Cgi Articles
Say it with roller banners
Aug 31st
Say it with roller banners
Roller banners are banners that can be rolled up and down. They are used to hold announcements and are used to display them prominently at shopping places, events or at some strategic locations. Roller banners come in different sizes and they are of different types. They are a great portable display solution. Typically roller banners are delivered by most banner makers within 48 hours from confirmation of design and content. Usually users can make their own designs and save them as files. Roller banners are then designed using the content from these files.
They can also be made with the designers who are usually there at the banner makers’. The print quality is so good in these advanced technology days that the banners look like real life pictures that have been blown up. Some roller banners come with their own stands and their own carry bags too. This makes them easy to be carried around and placed where ever needed at a moment’s notice.
The roller banners are typically protected with anti glare technology and anti scratch technology that makes them long lasting and tough. Assembling roller banner stands is a very simple process – there is normally a graphic panel that can be rolled out and a telescopic pole that can be attached to it to give the roller banners a vertical support. Another type of roller banners comes with a wide base which is made of aluminium – it is not only attractive but also stable. This type is preferred in busy environments where there is a lot of movement. These roller banners come with a hinged lid for integral storing of poles. Roller banner stands also come with an anodised silver base available in different widths. These roller banners come with a twist and lock graphic pole as part of the stand.
There are roller banners that have displays on both sides – so with a single roller banner, businesses can make twice the impact on the public. Some roller banners use the Ratchet Tensioner which helps to keep the display looking great for a very long time without sagging. The Quick Change roller banners are really useful where changes are often required in the content. There are quick change cassettes that are placed in the roller banner stands. When ever the graphics have to be changed, all the user has to do is to order a replacement for the cassette and change it. There is no need to return the entire banner stand. Not only that, there is no need to waste time either.
A library of roller banners graphics can be built too without the need to buy multiple roller banner stands. This also saves a lot of money while giving the flexibility of changing graphics often. For environmentally conscious businesses, bamboo roller banners are an ideal solution. They are made from bamboo and 90% renewable resources as bamboos grow back easily and quickly. These roller banners are a green solution for graphic displays and are also easy to transport, set up and dismantle.
Popular flyers are the A6 flyers, Flyers became popular during the 1980s and 1990s. They are constantly evolving and a lot of creativity is coming into play. For more information Visit Us at http://www.rfkprintsolutions.co.uk
Factors That Influence the Choice of Braces for Teeth
Aug 30th
Factors That Influence the Choice of Braces for Teeth
Many people who want to have a perfect smile turn to braces as the right means of straightening crooked teeth. There are all sorts of materials and designs when it comes to braces for teeth, and the offer is so wide, you may have difficulties in choosing: gold or regular metal, ceramic, invisible brackets, lingual braces and more, how should one know what to choose? First of all, the dentist’s advice is crucial when it comes to selecting a certain model of braces for teeth, but the patient’s opinions and wishes are definitely taken into consideration as well. There are several factors that influence the choice, and they all need to be discussed with the dentist.
The type of braces for teeth can depend on the extent of the treatment, particularly given the fact that all sorts of elements could influence its complexity. Thus, the degree of tooth crookedness and the way the bite is affected are the first to be connected with the choice of the braces for teeth. According to this factor, you will have to wear the braces for a longer or shorter period of time; the doctor may even have to extract some of the teeth in order to make all the applications possible. The price could also be an important factor when it comes to straightening crooked teeth: how much do you afford to pay for the braces?
Very often the aesthetic aspect of the braces for teeth is seriously taken into consideration; given the fact that you’ll have to wear the metal brackets for six months or even a year, you’ll definitely be worried about your looks. This is why ceramic brackets have become the most popular on the market, since they are the least visible braces for teeth. The bands that make the connection between the arch wire and the ceramic brackets are made of transparent or white material, which renders them little visible.
However, there are certain inconveniences related to the use of ceramic braces for teeth. The most serious issue is that the white or transparent ligatures can easily stain, and then you can say goodbye to your good looks. You’ll have to change the ligatures every time you go to the dentist, usually on a monthly basis; furthermore, this type of braces for teeth is a lot more expensive than the regular metal ones that use traditional brackets. Last but not least, the treatment with ceramic braces for teeth usually takes a little longer than with other regular orthodontic devices; hence you may have to wear the brackets for a few months more.
Traditional Radiators or More Trendy Radiators
Aug 29th
Traditional Radiators or More Trendy Radiators
Whether it is used in a car or in a building, the goal of a radiator is to deal with the heat!
But funnily enough, the radiator of a car, bus or motorbike is not used to warm it up, but rather cool it down. The radiator actually transfers the heat using a fluid which is a blend between water and ethylene glycol. It takes the heat from inside to outside in order to cool the engine. To be as efficient as possible, the radiator will usually be at the front of the vehicle where it will receive air from the movement of the car. The person who invited the automobile water radiator in the nineteenth century is Karl Benz.
Obviously, we did not wait the nineteenth century to get warm in a building, and heating systems were put into place in very early ages. As a matter of fact, the Romans kind of invented the under floor heating.
As for the conventional radiator that we can find in our homes, it was invented in the nineteenth century by Franz San Galli. They simply consist of a hollow metal container that would usually be of flat shape, even though nowadays, you can find designer radiators of any shapes. Hot water gets into the radiator from pipes and then works its magic to warm a room up.
There are now many different types of radiators such as steam, electric, fan assisted radiators or even under floor heating.
Steam radiators tend to be the preferred kind of radiators used as the steam inside the radiator is going to flow through the pipes under its own pressure without the need for any pumping, thus reducing the energy cost. This is the reason why it was actually adopted before electric motors and pumps became available on the market. Steam is actually much easier to distribute in tall buildings like skyscrapers than hot water.
Fan assisted radiators are much recent kind of radiators. But because of their small size and even distribution of warm hair, they could be used more and more by people. As they are different from other types of more traditional radiators like cast iron radiators or heated towel rails radiators, some people consider them as designer radiators London. On the other hand, the biggest disadvantage of this type of radiator is that the fan does need electricity supply to work and is making noise as well.
Robert is a plumber who knows a lot about traditional radiators, heated towel rails radiators and designer radiators London.
Music video by The Radiators performing Like Dreamers Do. (C) 1987 SONY BMG MUSIC ENTERTAINMENT
Video Rating: 5 / 5
Replacing Laptop Screen To Save Money
Aug 28th
Replacing Laptop Screen To Save Money
What would you do if only some particular part of your laptop is broken? What if laptop’s warranty has expired or does not cover the part replacement? Would you try to find some place to repair? Or pay the laptop manufacturer to fix?
The millions of laptops are broken worldwide every year; and statistically, the most breakable part is an LCD screen. What to do if your laptop screen is broken and you do not have warranty anymore? You may try to find some place to repair or to ask the laptop manufacturer to fix, or to look for a new laptop. As a rule, these options would be not the best for your budget. One of the cost-effective solutions is to replace the laptop screen on your own. In this case, you may save money on the cost of the laptop screen and labor. Do not worry if you are not a tech person – in less than an hour and with a couple of tools, you will be able to replace the screen on your own.
First, you will need to define an exact model number for LCD screen replacement. To determine which screen model is compatible with your old panel, you may use some on-line illustrated guide. It shows also how to disassemble the laptop LCD screen. The next step is to find the companies that sell LCD screens on the Internet – normally it is exact the same screen but you will get it fast and for less. Depending on the screen model, the price can be within a range of -150 including shipping. The quality of the screens are the same – the reason why some companies can afford to sell them for less is their business model – they buy wholesale with discount.
Note that when the old LCD panel removed, the installation of the new screen is done by following disassembling steps but in reverse order. The screen power connector should be the last connection to make, after the video cables on the back are in place and the screen is attached with screws. The final step, before the bezel inserts into place, is making sure the wires are put in place and not get pinched.
Technical Writer at LaptopScreen.Com
Secrets To Halving Your Business Electricity Bills
Aug 27th
Secrets To Halving Your Business Electricity Bills
When it comes to electricity, small and medium size enterprises can never assume they are getting a good deal. In fact, it’s safe to say that – as the market stands today – businesses should assume the opposite is true, and that they are being taken for a ride by the big six energy providers. One of several smaller providers of business electricity, Electricity4Business has just compiled a free guide to help electricity customers see through the dirty tricks.
Despite the bad publicity heaped on industry fat cats, over 20% of customers have never switched electricity providers since deregulation of the market. The reason is that they simply don’t have access to the right information. This document not only states the case for switching, it also provides all the necessary information and shows businesses how to carry it through.
In the UK, the chances are high that a small or medium size business receives its electricity from one of the six major companies. In fact, between them, British Gas, EDF Energy, Npower, Powergen, Scottish & Southern Energy and Scottish Power share 96% of the market. Despite the promise of competition through deregulation, all of these providers have routinely been able to raise prices by putting their customers on ‘evergreen’ fixed-price contracts that are automatically extended for months or even years unless the costumer takes timely action. If businesses fail to provide notice within a specified period, suppliers reserve the right to increase prices, even as the wholesale price of electricity goes down. As a result, customers that signed up to a long-term contract in early 2006 – when energy wholesale prices were at their peak – are often paying double or even triple today’s market price for their electricity.
If companies are wise to the tricks they can expect from their electricity supplier, they can switch and slash their electricity bills at a stroke. It’s as simple as that, many of the customers at Electricity4Business save in excess of £1000 a year, simply by filling out our template letter and switching to our fair and flexible pricing plan.
To download the Electricity4Business “Guide to the small print of electricity contracts” go to www.electricity4business.co.uk
Graham Paul is the Sales & Marketing Director of Electricity4Business. E4B is an electricity supplier that saves from 40%-70% off your business electricity bill. Visit Electricity4Business.co.uk
Find More Business Electricity Articles
How To Find Professional Video Production Services For Your Website Or Company Promotion?
Aug 26th
How To Find Professional Video Production Services For Your Website Or Company Promotion?
You are trying to find professional video production services for your website or company promotion? Then read on the article to find out a few secrets about online video marketing services.
Today there are a number of video production services on the modern market to choose from. So you might be confused or frustrated. But this guide will show you how to easily choose the best video production service for your website or company promotion.
Video Production: How To Find Professional Video Production Services?
First, you should determine:
– What You Need A Promotional Video For;
– How Often You Need An Advertising Video;
– How much your budget is.
After you have defined all these factors, you can start searching for good video production services. But here you have 2 options:
Either to choose expensive professional video production services
Or use special video creation services/tools which charge a low fee on a monthly or yearly basis.
The first option is suitable for you, if you have big budget. But if you want to save your money, but still need to create a number of videos on a regular basis, then the second option is just for you! Why? – Because in this way, you will be able to save a lot of money and still make professional videos on your own with just a few clicks. If your budget is tight, I would highly recommend you Article2Video which allows you to convert article to video within a few seconds.
Conclusion:
Now you know how to find professional video production services for your website or company promotion. It is the very time to act just now!
Also read:
Video Marketing: Boost Your Firm’s Profits Via All New Video Marketing Techniques!!
Would you like to try amazing Article2Video article to video software that creates video from articles using a full blooded human voice with perfect accent and fluid English, even if you can`t put two English sentences together correctly?
As a professional programmer I approve and use Article2Video to pump-out hundreds of videos in a week for generating HIGHLY targeted INSTANT traffic and getting to the 1st page of Google within 24 hours. Try it only for just today at http://article2videos.info!
VideoUno Studio is Houston’s innovative new media video production servicecompany. Producing and publishing high-impact, affordable and effective, web, mobile and broadcast video ads for local and national businesses. VideoUno Studio is committed to creating quality videos that capture the unique nature of our customers, products and services. VideoUno Studio Creates cost-effective videos that help companies sell their products. Our business expands through satisfied client references. We are known for our work, our people and our innovative on-time video production with striking results. VideoUno Studio Advantage Executive Suites 24800 I-45, Ste. 120 Woodlands, TX 77386 Phone: 832.228.1093 Email: videounostudio@gmail.com Website: www.VideoUnoStudio.com From I-45, take Exit 73 (RAYFORD/SAWDUST EXIT) Video Production Service, Houston, Texas, Internet, Online, Web, Streaming, Mobile, Social Media, High Definition, Digital, Advertising, Green Screen, DVD, Company, Music, Editing, Google Ad Creation Marketplace, Services, in all 50 States, USA, New, Studio, The Woodlands, TV, Iphone 4, Post Production, Production Video, Chromakey, On Video, Videographer, Smartphone
Video Rating: 0 / 5
The Ultimate Use For 360-Degree Feedback: Validating Individual Performance Improvement
Aug 25th
The Ultimate Use For 360-Degree Feedback: Validating Individual Performance Improvement
What’s the purpose of 360-degree feedback? What are the most powerful ways to use it?
The technology for collecting and reporting multi-source feedback was developed in the 1980s. Its original purpose was to diagnose leadership performance. By assessing a comprehensive set of skill areas, leaders obtained quantitative and qualitative information about strengths and areas that need improvement.
Other innovative uses for multi-source feedback have evolved over the decades. However, when most people hear about 360-degree feedback, they still think of its traditional use: a global diagnostic of competence and skill.
A much more powerful application of 360-degree feedback goes beyond the diagnosis to support changes in behavior. A doctor’s diagnosis can reveal the disease, but this information can’t cure it. Likewise, 360-degree feedback can identify priority areas for improvement, but this information isn’t enough to improve work habits. Changing a behavior pattern may require instruction, followed by months of reinforcement. Try changing the way you eat or the way you swing a golf club. Tiger Woods made changes in his swing early in 2004, and he didn’t start to win again until almost a year later, after persisting through hours of practice every day.
The problem is that even with the best of intentions, when people try to do things differently, initial attempts tend to feel awkward. When these efforts don’t achieve the desired result, frustration and discouragement follow. Without a formal program of follow-through reinforcement and without support from the direct manager and others in the workplace, people tend to fall back on what feels familiar and comfortable. They eventually return to their old way of doing things.
To achieve the desired changes in behavior, 360-degree feedback needs to be followed by several months of reinforcement, involving ongoing learning, ongoing feedback, coaching and accountability. It takes that long for the brain cells to grow and reconnect into new pathways that are the physical basis for new behavior patterns.
After people are ASSESSED in underdeveloped skill areas, they may need TRAINING. Either or both of these interventions must be followed by an extended period of REINFORCEMENT. This commonsense developmental sequence is the foundation of what is perhaps the most powerful 360-degree application ever devised: VALIDATING INDIVIDUAL PERFORMANCE IMPROVEMENT. Used in this way, 360-degree feedback works both as a diagnostic assessment and as a means to check whether weak areas have improved.
The concept is simple. First, integrate behavior-based assessment with behavior-based training. Then several months after training, follow through with a more focused behavior-based assessment related to the priority areas for improvement. Compare the pre-course scores with the post-course scores. Improved scores will indicate how much skills have improved.
This approach has significant benefits. First, the results of the pre-course diagnostic allow participants to set quantified, behavior-based performance improvement goals.
Also, knowing that follow-up assessments will be administered causes learners to be more focused and motivated as they work with trainers-the ideal mindset for learning.
In addition, the post-course assessments give learners quantified and qualitative feedback about how they’re doing as they try to improve their skills.
Finally, following through with post-course assessments creates accountability. The assessment results will document whether the individual has improved on-the-job performance. Repeat post-course assessments can be administered as desired to produce ongoing measures of performance improvement.
To implement this system, you’ll need a fully customizable 360-degree assessment system, because the assessment items need to be tailored to exactly mirror the desired behaviors taught in training. In other words, assessment and training must be integrated.
Also, the assessment needs to be affordable. Inexpensive unlimited assessment licenses for each person make it possible to give learners all the feedback they will need after training-without additional expense.
For leadership development, many organizations use the 20/20 Insight GOLD feedback software to administer the diagnostic assessment, identifying strong and weak areas. Then the training program is conducted to focus on high-priority weak areas. In addition to assessment and training, this approach involves ongoing support for the structured period of reinforcement.
You don’t have to repeat the entire diagnostic assessment to measure how much performance has improved. Instead, post-course assessments need only focus on priority developmental areas. Since the pre-course and post-course items are identical, scores can be compared. This ability to measure improvements in performance fulfills the need for ongoing feedback and accountability.
The data created by performance improvement assessment can also be used as a practical return-on-investment (ROI) calculation. For example, assume that leadership skills account for half of a supervisor’s effectiveness. Assessment scores showing an average improvement from 6.4 (before assessment and training) to 7.7 (several months after) would indicate a 20% percent improvement. Since half of a salary of ,000 is ,000, the organization would be getting 20% more effectiveness for this cost, worth roughly ,500-a result many times greater (in dollars) than the cost of the individual’s training.
Simple ROI calculations like this can be performed locally. They are made possible by pre-course/post-course performance improvement measurements powered by customizable 360-degree feedback.
The bottom line: global diagnostic assessments serve an excellent purpose if you follow through with learning and reinforcement. Combine an affordable, customizable 360-degree feedback technology with a behavior-based leadership development curriculum, and you get a fully integrated assessment, training and reinforcement system:
- Focused, motivated learners
- Ongoing feedback during reinforcement
- Performance improvement accountability (Level 3 evaluation of training)
- An easy method for calculating ROI (Level 4 evaluation of training)
More important, leaders are empowered to reinforce and ingrain their new skills over time to create PERMANENT, MEASURABLE CHANGES IN BEHAVIOR – the Holy Grail of leadership development.
In the end, how well your managers lead affects the bottom line – and every other aspect of your organization. Considering the billions of dollars invested annually in leadership development, organizations need a way to demonstrate whether these programs are actually changing behavior. Using multi-source feedback to measure performance improvement is the most effective way to quantify the return on your investment.
Copyright © 2007, Performance Support Systems, Inc. All rights reserved.
Dennis E. Coates, Ph.D. is CEO of Performance Support Systems, Inc., publisher of 20/20 Insight GOLD (http://www.2020insight.net), a highly flexible software program for gathering all types of performance feedback. about individual, team and organization performance.